Clear Tip Clogs - Graco SaniSpray HP 20 Operation - Repair - Parts

Clear Tip Clogs

To avoid injury, never point sprayer at your
hand or into a rag!
In the event debris clogs the Spray Tip, the
sprayer is designed with a reversible Spray
Tip that quickly and easily clears the particles
without disassembling the sprayer.
1. To unclog Spray Tip, turn Prime
Pump/Spray Knob downward to PRIME
position.
2. Reverse Spray Tip to UNCLOG position.
3A7649A
3. Set Speed Control to 10.
4. Point sprayer into waste bucket, turn
Prime Pump/Spray Knob forward to
SPRAY position. Pull Spray Trigger for 5
seconds to clear clog.
NOTE: If Spray Tip is still clogged, you may
have to repeat steps 1 – 4, or replace with
new Spray Tip assembly. See Choose Your
Spray Tip, page 15.
ti29755a
5. Turn Prime Pump/Spray Knob downward
to PRIME position. Rotate Spray Tip
back to SPRAY position. Turn Prime
Pump/Spray Knob forward to SPRAY
position, and resume spraying.
How to Spray
17