Cleaning Vacuvalve - Graco SaniSpray HP 20 Operation - Repair - Parts

Cleanup and Storage

Cleaning VacuValve

The VacuValve is an important part of your
sprayer and it should be cleaned after every
use.
1. Remove VacuValve Cap from Cup Lid
and clean it.
2. Clean VacuValve Reservoir in lid.
3. Clean VacuValve Air Hole. If VacuValve
Air Hole becomes clogged, use a paper
clip to clean the hole.
ti23406a
18
4. Install VacuValve Cap back onto Cup
Lid.
5. Make certain the VacuValve Cap is
closed.
ti29723a
3A7646C