Important Safeguards And Precautions - VKI Technologies Eccellenza momentum Operation Manual

Operation Manual

Important Safeguards and Precautions
















8
This equipment is designed for indoor use ONLY and must never be installed outdoors.
This equipment requires a 120-Volt 20-Amp wall outlet like the one shown below:
The installation of this equipment must comply with all municipal, state/provincial, and
federal electrical and plumbing codes.
Installation and servicing of this equipment must only be performed by qualified
personnel. Do not attempt to install or service this equipment if you are not qualified as
it may result in personal injury. There are no user-serviceable parts inside the
equipment.
Do not use an electrical extension cord or power bar.
This equipment must be installed in a location with an ambient temperature between
5°C-35°C (40°F-95°F).
The main water supply pressure must be between a minimum of 20psi and a maximum
of 100psi.
This equipment must be positioned so that the wall plug and the main power switch are
both easily accessible.
Do not connect this equipment to a voltage supply other than the voltage indicated on
the serial number decal.
Do not immerse this equipment, or any part of this equipment, in liquid.
Do not install the equipment in an area where water spray is present.
This equipment must be installed securely on a level surface. If it does not appear to be
a stable location, select another installation location.
Leave a minimum of 2" (5cm) of space all around this equipment for proper ventilation.
Keep hands clear of the dispensing area at the front of this equipment. Liquids being
dispensed are extremely hot and can cause severe burns.
Never disconnect this equipment from the wall outlet by pulling on the service cord,
and never use this equipment if the service cord is damaged.
VKI Publication #202377-001