Setting The Default Coffee Blend; Configuring The Carafe - VKI Technologies Eccellenza momentum Operation Manual

Operation Manual

Setting the Default Coffee Blend

While in the 'Beverages' tab, you can set the default coffee type to be used for each beverage that
uses coffee. By default, they are all set to "French Roast", as you can see in the image below.
The default coffee must be set for each of the beverages independently, as there is no global
setting for this option. To change the default coffee blend, tap the blend shown beneath the
beverage to cycle it to the next blend. Repeat the process until the required blend is displayed.

Configuring the Carafe

While in the 'Beverages' tab, you can also configure the carafe option. Simply tap on the carafe
icon to change its state.
•
When the icon is greyed out, the carafe is disabled.
•
When the icon is green, the carafe is enabled.
•
When the icon is green with an image of a lock in the
center, the carafe is active, but requires a PIN to be able
to use it. The PIN can be set in the "Security" menu.
66




Repeat this procedure for any of the other beverage, if necessary.
VKI Publication #202377-001