VKI Technologies Eccellenza momentum Operation Manual page 12

Operation Manual
4. Remove the front and rear foam supports (C).
5. With the help of a colleague, lift the coffee maker off the base of the packaging (D) and
6. Remove the keys and the Telemetry Antenna from the cup stand. Install the telemetry
7. Slide the residue chute into the slots at the bottom of the machine.
8. Remove the blue shipping tape and protective film from the outside of the machine
12
Do not discard the front foam support as it must be installed over the machine's
screen to protect it during transport.
place it onto a workbench or cabinet. Do not attempt to lift the machine by yourself.
DO NOT lift the coffee maker by placing your hand underneath the front
door. It is not designed to support the weight of the machine, and serious
personal injury and/or damage to the unit may occur.
antenna to the round connector at the top right corner on the rear of the machine.
and from the stainless steel drip tray grill.
Keep all packaging material in case the equipment must be transported or
shipped. When transporting the unit for installation, leave it on the base of
the packaging to reduce the risk of damage to the levelers.
VKI Publication #202377-001