Drive Enclosure; Figure 45 Front View Of A 2.5" Type Drive Enclosure; Figure 46 Rear View Of A 2.5" Type Drive Enclosure - Fujitsu ETERNUS DX500 S3 Overview

6. Hardware Configurations

Drive Enclosure

Drive Enclosure
This section explains the main components in the drive enclosure.
The drive enclosure contains drives installed in the front, and I/O modules and power supply units in the rear.
Three types of drive enclosures are available; a 2.5" type, a 3.5" type, and a high-density type.
Drive enclosures can be added during system operation. When an error occurs, replacement operations can be
performed while the system is running.
■
External Views of a 2.5" Type Drive Enclosure
●
Front View

Figure 45 Front View of a 2.5" Type Drive Enclosure

1
1. 2.5" disk or 2.5" SSD
●
Rear View

Figure 46 Rear View of a 2.5" Type Drive Enclosure

1
3 4
1. I/O module (IOM#0)
2. I/O module (IOM#1)
3. Drive interface (IN) port
4. Drive interface (OUT) port
5. Power supply unit (PSU#0)
6. Power supply unit (PSU#1)
2
5
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview
Copyright 2019 FUJITSU LIMITED
3 4
6
75
P3AM-7702-29ENZ0