Panasonic DP-CL18 Service Manual page 28
Color laser printer
Hide thumbs
Also See for DP-CL18:
- Specifications (6 pages) ,
- Setup manual (24 pages) ,
- Technical manual (223 pages)
Table of Contents
Advertisement
DP-CL18
If the hard disk drive option has been installed in the printer, confirm the hard disk
drive is fastened with two screws provided. If it is not installed, proceed to step 26.
21
Remove the two thumb screws from the main
control board.
22
Pull out the main control board while holding the
green handle.
23
Reconfirm the hard disk drive is fastened with two
screws. If it is not fastened, fasten it with two
screws.
24
Install the main control board back into the
printer, as shown.
25
Tighten the two thumb screws.
28
Advertisement
Table of Contents
