Panasonic DP-CL18 Service Manual page 103

DP-CL18
7.2.4. Lifting up FTR Roller
The FTR roller(s) is (are) contacted to the accumulator belt or released from the accumulator belt by the "FTR Roller Lifting Up"
mechanism consists of the FTR lift levers, FTR cams, cam shaft, etc.,. The following indicates the FTR lift levers, FTR cams, cam
shaft and FTR cam slider in the accumulator tension unit.
The FTR cam slider is engaged with the projections (C)-(D) in the accumulator tension unit. The projection (C) on the FTR lift lever
moves to the arrow (E1) direction by the FTR cam rotation. This projection (C) movement moves the FTR cam slider to the arrow
(E2) direction. When the FTR cam slider moves to the (1) direction of arrow (E2), the FTR roller in the accumulator unit contacts
with the accumulator belt. Regarding the detail information, refer to the next section "FTR Roller Lift Mechanism". This model has
4 FTR rollers (cyan, magenta, yellow and black) The changer solenoid, changer lever and FTR cam slider are used for selecting
FTR rollers. Normally (when the changer solenoid is turned off), the FTR roller for black is selected. When the changer solenoid
is turned on, the changer lever moves to the arrow (F1) direction. As a result, the FTR cam slider moves to the arrow (F2) direction.
All FTR rollers (cyan, magenta, yellow and black) are selected, and contacted with the accumulator belt when the FTR cam slider
moves to the (1) direction of arrow (E2).
103