Panasonic DP-CL18 Service Manual page 209

(7) Perform the steps (4) and (5) in section 13.3.1 "Check of Skew". Make sure that the black
line is in between 3 color lines [Area (A)] as shown below (Fig-6). If the skew is good,
reinstall the access panel, left cover, rear cover and long main board screw. If not, repeat
the steps (3) ~ (7).
(Top Edge of Paper)
Black Line
Color (Cyan, Magenta,
Yellow) Line
Fig-6
Area (A)
Outputted
209
DP-CL18