Panasonic DP-CL18 Service Manual page 114

DP-CL18
7.3.8. Paper Exit and Paper Switchback
7.3.8.1. Normal Printing Mode (Not Duplex Printing Mode)
After fusing, paper is fed to the output tray by the paper exit roller. Rotation from the BK motor is transmitted to the double teeth
gear. The rotation of double teeth gear is transmitted to the paper exit roller gear through intermediate gears in order of numbers
(1 - 8). The arrows indicate the rotation direction of each gear.
The Paper is ejected face down and stored in the output tray. The paper full sensor detects whether the paper output tray is full,
and if the tray is full, the message "Output Tray Full"is displayed on the LCD panel.
( Normal Printing Mode )
Rotation Switching Gear - A
( Rotation of this Gear is locked
because the Switching Lever engages. )
Switching
Lever
Switchback
Solenoid
( From Fuser Unit )
Paper Exit Roller
( To Paper Tray )
Double Teeth
Gear
114