Panasonic DP-CL18 Service Manual page 142

DP-CL18
(7) Remove the bushing (B) from the pickup roller shaft.
(8) Remove the bushing (A) while unlatching the bushing hook
from the pickup roller shaft.
(9) Remove the 2 pickup roller assemblies from the pickup
roller shaft by sliding it in the arrow direction while
unlatching the hook from the groove of pickup roller shaft.
(10) Remove the pickup roller shaft with the 2 pins.
(11) Remove the 2 springs from the paper feed unit frame.
(12) Remove the registration roller, registration pinch roller and
2 bushings.
(13) Remove the paper empty/registration sensor board.
(14) Remove the registration sensor lever and lever spring.
(15) Remove the paper empty sensor lever.
(16) If necessary, remove the varistor.
142