Panasonic DP-CL18 Service Manual page 27

13
Replace the protective tray (1), upper seal cover (2)
and protective cap (3).
Be sure the sealing lever of the print cartridge is
exposed through the lower seal cover .
Lever
Lower Seal Cover
14
Insert the black print cartridge into the black plastic
bag and seal the end of the bag tightly with
adhesive tape.
15
Close the print cartridge holder [(1)-(2)] and lock it.
Close the right cover (3) (right side door).
1 1
2 2
Note:
Be sure the accumulator unit is kept in the printer.
3 2
1
2 2
Accumulator unit
3 3
27
16
Remove the media from the multi-purpose tray.
Push the multi-purpose tray (1) and close the tray
cover (2).
17
Pull the media tray (1) out of the printer. Remove the
media (2) from the media tray and install the tray pad
(3) into the media tray.
3
1
18
Install the media tray into the printer.
19
Close (1) and insert (2) the paper support into the
printer.
20
Confirm all toner cartridges are completely installed
in the printer.
1
2
2
2
1
DP-CL18