Panasonic DP-CL18 Service Manual page 26

Color laser printer
Hide thumbs Also See for DP-CL18:
Table of Contents

Advertisement

DP-CL18
8
Close the PC shutter and wipe off any loose toner on
the color print cartridge using a toner vacuum. Do not
use a standard office vacuum; the toner will not be
retained by typical vacuum dust collectors.
Caution 1:
If replacing the upper seal cover though the
toner is on the color print cartridge, the toner
will be scattered when removing the upper
seal cover. The scattered toner may be
attached to the OPC drum and the poor print
quality will be caused.
Caution 2:
If the print cartridge is wiped using a toner
vacuum when the PC shutter is opening, the
toner in the print cartridge is sucked and
charged. This charge is discharged to the
OPC drum and the OPC drum may be
damaged. Wipe off the toner on the print
cartridge using care that the PC shutter is
not opened.
Move the PC shutter in
this arrow direction to
close the PC shutter.
Replace the protective tray (1), upper seal covers (2-4)
9
and protective caps (5).
Be sure the three sealing levers of the print cartridge
are exposed through the lower seal cover.
Lever
10
Insert the color print cartridge into the black plastic
bag and seal the end of the bag tightly with adhesive
tape.
PC Shutter
2
3
5
4
1
Lower Seal Cover
11
Pull out the black print cartridge.
Note:
To prevent damage to the print cartridge;
- Do not touch the green drum surface.
- Do not expose to light for more than 45 minutes.
- Do not expose to direct sunlight.
12
Close the PC shutter and wipe off any loose toner on
the black print cartridge using a toner vacuum. Do
not use a standard office vacuum; the toner will not
be retained by typical vacuum dust collectors.
Caution 1:
If replacing the upper seal cover though the
toner is on the black print cartridge, the toner
will be scattered when removing the upper
seal cover. The scattered toner may be
4
attached to the OPC drum and the poor print
quality will be caused.
Caution 2:
If the print cartridge is wiped using a toner
vacuum when the PC shutter is opening, the
toner in the print cartridge is sucked and
charged. This charge is discharged to the
OPC drum and the OPC drum may be
damaged. Wipe off the toner on the print
cartridge using care that the PC shutter is
not opened.
Move the PC shutter in
this arrow direction to
close the PC shutter.
26
PC Shutter

Advertisement

Table of Contents
loading

Table of Contents