Meter Instructions - York Fitness C400 Owner's Manual

Meter Instructions

FUNCTIONAL BUTTONS:
MODE - Push down for selecting functions.
SET - To set the values of time, distance, calories and pulse when not in scan mode.
RESET - Push down for resetting time, distance and calories.
FUNCTION AND OPERATIONS:
1. SCAN: Press "MODE" button until "SCAN" appears, meter will rotate through all the 5 functions:
Time, speed, distance, calorie ODO and pulse. Each display will be hold 4 seconds.
2. TIME: (1) Count the total time from exercise start to end. (2) Press "MODE" button until "TIME"
appears, press "SET" button to set exercise time. When the "set" is zero, the computer will alarm 15
seconds.
3. SPEED: Display current speed.
4. DIST:
(1) Count the distance from exercise start to end.
(2) Press "MODE" button until "DIST" appears. Press "SET" button to set exercise distance. When the
"set" is zero, the computer will alarm 15 seconds.
5. CALORIES:
(1) Count the total calories from exercise start to end.
(2) Press "MODE" button unit "CAL" appears. Press "SET" button to set exercise calories. When the
"set" is zero, the computer will alarm 15 seconds.
6. ODO: Meter will display the total accumulated distance.
7. PULSE: Press MODE button until "PULSE" appears. Before measuring your pulse rate, please place
your palms of your hands on Both of your contact pads and the meter will show your current heart beat
rate in beats per minute(BPM) on the LCD after 6~7 seconds.
Remark: During the process of pulse measurement, because of the contact jamming, the
measurement value may be higher than the virtual pulse rate during the first 2~3 seconds, then will
return to normal level. The measurement value cannot be regarded as the basis of medical treatment.
NOTE：
1. If the display is faint or shows no figures, please replace the batteries.
2. The meter will automatically shut off if there is no signal received after 4 minutes.
3. The meter will be auto-powered on when starting to exercise push button w/signal in.
4. The meter will automatically start calculating when you start to exercise and will stop
calculating when you stop exercising for 4 seconds.
SPECIFICATIONS:
FUNCTION
Operating temperature
Storage temperature
14
Auto Scan
Time
Current speed
Trip Distance
Calories
ODO
Pulse Rate
Battery type
Every 4 seconds
00:00 – 99:59
The maximum signal can be picked
up is 999.9 KM/H
0.00～9999 KM
0.0～999.9 kCAL
0.0～9999KM
40~240BPM
2 pcs of size – AA or UM- 3
0℃ ～+40℃
- 10℃ ～+60℃