York Fitness C400 Owner's Manual page 12

STEP 3
Take down the two cross-head screws (29) which are pre-assembled on the meter (18).
Attach the handlebar (24) to the front post and fasten with one clamp (25), one allen bolt (26), one clamp
cover (27) and one T type knob (28).
Connect the upper sensor cable (32) to the sensor cable from the back of meter (18).
Insert the joint of hand pulse wire (33) to the pulse hole on the back of meter (18).
Attach the meter (18) to the front post (31) and fasten with two cross-head screws (29).
STEP 4
Attach the seat w/sliding seat (17) to the seat post (13) and fasten with one carriage bolt (68), one square
washer (69), one sleeve (70) and one club knob (23).
Insert the seat post (13) into the main frame (1) and fasten with a quick release knob (10) which could adjust the
height to your desired position.
12