Monitoring With Headphones - PIONEER DJ DJM-V10 Instruction Manual

Monitoring with headphones

1 Connect headphones to the [PHONES A] or [PHONES B]
terminals.
2 Press the [CUE] button ([CUE A], [CUE B] or [LINK CUE]) to
select the sound you want to monitor.
• For monitoring sound via [HEADPHONES B], skip to 5.
3 Press the [PRE EQ] button to set the output sound (pre EQ or
post EQ).
4 Press the [MONO SPLIT] button to set the sound output
(MONO SPLIT or stereo).
5 Turn the [MIX] knob to adjust the volume balance between the
channel with the [CUE] button pressed and the master sound.
6 Turn the [LEVEL] knob to adjust the volume for the channel
with the [CUE] button pressed.
• Press the [CUE] button again to turn off monitoring.
Monitoring sound
38