PIONEER DJ DJM-V10 Instruction Manual page 27

— [EXT1] : Selects the effect sound of a device connected to the [EXT1 RETURN]
terminals.
— [EXT2] : Selects the effect sound of a device connected to the [EXT2 RETURN]
terminals.
— [BUILT-IN, EXT1, EXT2] : Selects the effect sounds of all [SEND] buttons ([BUILT-
IN] and [EXTERNAL] buttons).
TRIM knob
2.
Adjusts the volume for the channel input sound.
COMP knob
3.
Adjusts the compression level.
Turning clockwise increases its effect.
Turning all the way counterclockwise outputs the original sound.
4. EQ (HI, HI MID, LOW MID, LOW) knobs
Adjusts the volume of each band.
Each knob adjusts in the following range.
— [HI] : –∞ dB to +6 dB
— [HI MID] : –26 dB to +6 dB
— [LOW MID] : –26 dB to +6 dB
— [LOW] : –∞ dB to +6 dB
Channel level indicator
5.
Displays the volume level before the sound passes through the channel fader.
FILTER knob (page 42)
6.
BEAT FX ASSIGN button (page 56)
7.
8. SEND knob (page 44)
CUE A button (page 36)
9.
10. CUE B button (page 36)
11. Channel fader
Adjusts the volume for the channel output sound according to the channel fader curve
specified via [CH FADER CURVE] (page 30).
Moving it up increases the volume, and down decreases the volume.
12. CROSSFADER ASSIGN (A, THRU, B) selector switch
Assigns the channel output sound to the crossfader.
— [A] : Assigns to the [A] (left) side.
27
Audio output