Monitoring sound
HEADPHONES A/B sections
5 6
1
2
3
4
LINK CUE button
1.
Outputs the LINK MONITOR sound.
PRE EQ button
2.
Sets the sound (pre EQ or post EQ) output to the headphones.
Outputs the pre EQ sound when the button is lit, and the post EQ sound when it is turned
off.
• The post EQ sound is output to [HEADPHONES B].
MIX knob
3.
Adjusts the volume balance between the channel with the [CUE] button pressed and the
master sound.
PHONES A terminals
4.
Connect headphones.
• For monitoring sound with [HEADPHONES B], connect headphones to the [PHONES
B] terminals on the front panel (page 22).
7
36
7
8
8
1
3
6