Removing The Plate - Scosche MagicMount UQ01 Manual

MAGICPLATE'" MOUNTING OPTION 3 (Continued)
NOTE: For mounting directly* to Galaxy S9/S9+, use the (2) small plates with the integrated
template guide for Galaxy as shown. *For mounting directly to device only. Do not
mount to case.
O
Remove the
white paper
backing from
both plates.
E)
Remove the backing from the protective film as shown on the
removal tabs (A), and place between the device and the lower
plate (B). The protective film must be used when applying
MAGICPLATE
Q
Remove
template guide.

REMOVING THE PLATE

Use a thin plastic card to carefully lift the plate's adhesive surface from the mounting
surface. Slowly lift up and remove the plate.
plate, due to risk of damaging your phone. Contact Scosche Customer Service for any
additional assistance at: 1800.363.4490 Ext. 1 or customerservice@scosche.com
-- - -)
�
'�
TM directly to the back of device.
Q
Line up "U"
channel to the
fingerprint reader
and camera
on the phone.
, ------ . . ,, ,,
Do not use any heat or liquids to remove the
3
Galaxy Template
Step1-Rffllovethewhite
paperbackln9fromboth
mlO!alplah!L
Sbop2-Li,,.up•u•chonnel
tothefingerprlntre1der1nd
camera on the phone.
Step�-Whenpositloned.
pressplatesfirmlytoafti>c.
4-RoinowTomplotl!
=e
S e em■nualformore
detailed instructions