Connecting The Base Unit And Expansion Modules - Pilz PNOZ mc4p Operating Manual

Installation
5.3

Connecting the base unit and expansion modules

You can install a maximum of 1 PNOZ mc4p to the left of the base unit.
Connect the base unit and the expansion module as described in the operating instructions
for the base units.
Do not connect a terminator to the last expansion module on the left-hand side.
}
Install the expansion module in the position in which it is configured in the PNOZmulti
}
Configurator.
A distance of at least 20 mm must be maintained between the fieldbus module PNOZ
}
mc4p and any external heat sources.
Operating Manual PNOZ mc4p
21054-EN-05
14