Connect The Base Unit And Expansion Modules - Pilz PNOZ m ES RS232 Operating Manual

Installation
5.3

Connect the base unit and expansion modules

Connect the base unit and the expansion module as described in the operating instructions
for the base units.
Connect the black/yellow terminator to the expansion module.
}
Install the expansion module in the position in which it is configured in the PNOZmulti
}
Configurator.
The position of the expansion modules is defined in the PNOZmulti Configurator. The ex-
pansion modules are connected to the left or right of the base unit, depending on the type.
Please refer to the document "PNOZmulti System Expansion" for details of the number of
modules that can be connected to the base unit and the module types.
Operating Manual PNOZ m ES RS232
1002701-EN-04
| 12