Connecting The Base Unit And Expansion Modules - Pilz PNOZ m EF 8DI4DO Operating Manual

Installation
5.3

Connecting the base unit and expansion modules

Connect the base unit and the expansion modules as described in the operating manuals
for the base modules.
}
The terminator must be fitted to the last expansion module
}
Install the expansion module in the position configured in the PNOZmulti Configurator.
The position of the expansion modules is defined in the PNOZmulti Configurator. The ex-
pansion modules are connected to the left or right of the base unit, depending on the type.
Please refer to the document "PNOZmulti System Expansion" for details of the number of
modules that can be connected to the base unit and the module types.
Operating Manual PNOZ m EF 8DI4DO
1002661-EN-05
| 13