Connecting To A Paired Bluetooth Device - Sony NYSNO-10 Help Manual

Help Guide
Helmet Mounted Wireless Headset
NYSNO-10

Connecting to a paired BLUETOOTH device

Press and hold the
1
The main unit is turned on and automatically connects to the last-connected device.
When connection fails
Perform steps to
To connect to another device that has already performed device registration (pairing)
Perform the BLUETOOTH setting on the device, and select [NYSNO-10] to connect with the main unit via BLUETOOTH.
For details, refer to the operating instructions of the BLUETOOTH device.
Hint
The above operation is an example. For details, refer to the operating instructions supplied with your BLUETOOTH device.
If the BLUETOOTH device has been connected to the main unit previously, an HFP/HSP connection is made when you turn on
the main unit. While the main unit is on, you can make an A2DP connection (music playback) by pressing the
(Power, Answer, Play/Pause) button on the main unit.
Note
The connection may fail when the main unit is automatically connected to the last-connected BLUETOOTH device. In this case,
operate the connected BLUETOOTH device to disconnected.
Related Topic
How to make a wireless connection to BLUETOOTH devices
Pairing and connecting with other BLUETOOTH devices
Listening to music from a device via BLUETOOTH connection
/ / (Power, Answer, Play/Pause) button for more than 2 seconds.
in "Pairing and connecting with other BLUETOOTH
4-596-222-11(1) Copyright 2017 Sony Corporation
devices".
51
/ /