Sony NYSNO-10 Help Manual page 90

Help Guide
Helmet Mounted Wireless Headset
NYSNO-10
Resetting / initializing the main unit
Resetting the main unit and remote control
If the main unit does not operate correctly, reset the main unit and remote control.
Press the RESET button on the main unit and remote control with a pen or similar object until you feel the button. When
pressing the RESET button on the remote control, pairing information about the main unit is deleted from the remote
control. See "The remote control does not operate
main unit and remote control.
1.
RESET button
Initializing the main unit
If the main unit does not operate correctly even after resetting, initialize the main unit to restore factory settings.
Press and hold the RESET button on the main unit with a pen or similar object for more than 15 seconds. The
(Power) lamp (blue) on the main unit flashes 4 times, and the settings are reset to the factory settings. All pairing
information is deleted.
Note
After the main unit is initialized, it may not be able to connect to your iPhone. In this case, delete the pairing information of the
main unit from the iPhone, and then pair the main unit with iPhone again.
Related Topic
The remote control does not operate properly.
properly." to operate the device registration (pairing) between the
4-596-222-11(1) Copyright 2017 Sony Corporation
90