Sony NYSNO-10 Help Manual page 83

Help Guide
Helmet Mounted Wireless Headset
NYSNO-10
Unable to connect the main unit to a BLUETOOTH device with one-touch connection
(NFC)
Check that the BLUETOOTH device supports one-touch connection (NFC) and the NFC function of the BLUETOOTH
device is set to on.
Keep the BLUETOOTH device close to the main unit until the BLUETOOTH device reacts. If you fail to connect,
move the BLUETOOTH device slowly on the N-Mark of the main unit.
Unlock the screen of the smartphone, etc. if it is locked.
If the smartphone, etc. is in a case, remove it.
NFC reception sensitivity varies depending on the BLUETOOTH device. If you repeatedly fail to connect the main
unit with a BLUETOOTH device by one touch, connect it to the main unit by on-screen operation on the
BLUETOOTH device.
While charging the battery of the main unit, you cannot operate the main unit. Wait until charging is completed.
Related Topic
One-touch connection (NFC) with a smartphone (Android 4.1 or later)
4-596-222-11(1) Copyright 2017 Sony Corporation
83