Pairing And Connecting With Other Bluetooth Devices - Sony NYSNO-10 Help Manual

Help Guide
Helmet Mounted Wireless Headset
NYSNO-10

Pairing and connecting with other BLUETOOTH devices

Pairing is the process required to create a link between BLUETOOTH devices to allow wireless connection. You must
pair a device with the main unit to be able to make a BLUETOOTH connection for the first time.
Before you start pairing operation, make sure that:
The BLUETOOTH device is placed within 1 m (3.2 ft.) of the main unit.
The main unit is charged sufficiently.
The operating instructions of the BLUETOOTH device is on hand.
Press and hold the
1
The main unit enters registration (pairing) mode and the
Make sure that the
voice guidance indicating BLUETOOTH pairing.
Perform the device pairing procedure on the BLUETOOTH device to search for the main unit.
2
[NYSNO-10] is will be displayed on the list of detected devices on the screen of the BLUETOOTH device. If not
displayed, repeat from step
On the screen of the BLUETOOTH device, select [NYSNO-10] and register the device with each other.
3
(*)
If passkey input is required on the display of the BLUETOOTH device, input "0000."
* A Passkey may be called a "Passcode," a "PIN code," or a "Password."
Make the BLUETOOTH connection from the BLUETOOTH device.
4
Depending on the BLUETOOTH device, the main unit may connect with the device automatically as soon as they
are paired.
/ / (Power, Answer, Play/Pause) button for more than 7 seconds.
(Power) lamp flashes in blue and red alternately after you release the button. You hear
.
(Power) lamp flashes in blue and red alternately.
49