Sony NYSNO-10 Help Manual page 55

Help Guide
Helmet Mounted Wireless Headset
NYSNO-10
Functions with the remote control while playing music
If the BLUETOOTH device supports the device operation function (supported profile: AVRCP), you can control the
following operations by the remote control. The functions available may vary depending on the BLUETOOTH device.
Refer to the operating instructions supplied with your BLUETOOTH device.
Buttons on the remote control work as followings.
(Play/Pause) button
Press to pause music during playback. Playback is resumed when pressed again.
/ (Previous/Next) button
Press to skip to the previous/next song.
Press and hold to fast rewind/fast forward. It returns to the previous condition when released.
+/- (volume) button
Press to adjust the volume.
ATT/EQ (Attenuate/Equalizer) button
Attenuate: Press to lower the volume instantaneously. To return to the original volume, press the button again, or
press the + (volume) button on the remote control.
Equalizer: Press and hold for more than 2 seconds, and then press repeatedly to select the desired sound quality.
Press and hold for more than 2 seconds again to set the selected sound quality. Three types of sound qualities can
be selected.
Note
If the communication condition is poor, the BLUTOOTH device may react incorrectly to the operation on the remote control.
When you operate as listed above, it may operate differently or may not work at all depending on the BLUETOOTH device.
4-596-222-11(1) Copyright 2017 Sony Corporation
55