Lincoln Electric LF 52D Operator's Manual page 33


Press right knob [33] to continue.
Figure 68

Press the left knob [32] or button [34] to
exit.

Recording icon will appear on the Status
bar [35].
WARNING
To stop recording please move to Service Menu and
press the Service weld logs icon again.
Weld History – after recording, welding
parameters are saved into the USB device
folder.
To access the Welding history:

Make sure that USB device is connected.

Access to „Configuration" menu.

Go to Service Menu → Weld History
Figure 69

Press right knob [33] to get access of Weld history –
the list of used parameters:

Weld number

Average WFS

Average current [A]

Average voltage [V]

Arc time [s]

Welding program number

Job number/name
English
SnapShot – create a file that contains detailed
configuration and debugging information
collected from each module. This file can be
sent to
troubleshoot any possible issues that cannot be easily
resolved by the user.
To obtain a SnapShot:

Make sure that USB device is connected.

Go to Configuration → Service Menu → Snapshot

Press the right knob [33] to start Snapshot process.
31
Lincoln Electric Support
Figure 70
Figure 71
to
English