Lincoln Electric LF 52D Operator's Manual page 20


Press the right knob [33] to confirm - „Save to the User
Memory" is shown on the display.

Use the right knob to highlight the memory number
where the program would be stored.
Figure 23

Confirm selection – press and hold for 3 second right
knob [33].
Figure 24

Rename job – turn right knob [33] to select: numbers
0-9, letters A-Z, a-z. Press right knob [33] to confirm
first character of the name.

Next characters should be selected in the same way.

To confirm the name of job and go back to the main
menu press button [34] or left knob [32].
USB Memory - when the USB storage device
is connected to USB port user have access to
(Table 10.):
Table 10 USB Menu
Symbol
Save
Load
English
Description
Save – the following data can be save on a
USB Memory Stick: (Table 11.):
Table 11 Save and restore selection
Symbol
Current Welding Settings
Advanced Parameters Configuration
(P menu)
All welding programs stored in user
memory
M1
One of the welding programs stored in
user memory
M50
To save data into USB device:

Connect the USB to welding machine.

Add "USB Memory" icon to the Welding parameters
bar [41].

Use the right knob [33] to highlight the icon "USB
Memory".

Press the right knob [33] to confirm selection – the
USB menu is shown on the display.

Use the right knob [33] to highlight the icon "Save".
18
Description
Figure 25
Figure 26
English