Lincoln Electric LF 52D Operator's Manual page 28

Restore Factory Setting
WARNING
After Factory Settings restore, the settings stored in user
memory will be deleted.
To restore factory settings:

Access to "Configuration" menu.

Use right knob [33] to highlight the "Restore Factory
Settings' icon.
Figure 60

Press the right knob [33]. The "Restore Factory
Settings" icon is shown on the display.

Use the right knob [33] to highlight the "Check Mark".
Figure 61

Press right button [33] to confirm selection. The factory
settings are restored.
Machine information
Available information:

Software Version.

Hardware Version.

Welding Software.

Machine IP Address.
English
Advanced Setup
This menu enables access to the configuration
parameters of the device. To set the
configuration parameters:

Access to "Configuration" menu.

Use right knob [33] to highlight the "Advance setup"
icon.

Press right knob [33]. The "Advance Manu" is shown
on the display.

Use the Right Knob [33] to highlight the parameter
number which will be changed, for example P.1 -
allows change
"Metric" = m/min.

Press right knob [33].

Use right knob
(English/Imperial).

Press right button [33] to confirm selection.
26
Figure 62
WFS units, factory
Figure 63
[33] to highlight the
Figure 64
default:
in/min
English