Lincoln Electric LF 52D Operator's Manual page 26


Press right knob [33] to confirm. The "Enable/Disable
Jobs" menu is shown on the display.

Use the right knob [33] to highlight the job number.
The icon of chosen job will disappear from the lower
part of the display.
Figure 51

Press right knob [33]. The icon of the selected
program will disappeared from the bottom of the
display.
Figure 52
WARNING
The jobs which are disabled can not be using in "Save
memory" function – shown Figure 53 (job 2 is not
available).
Figure 53
English
To select Jobs for Job Work:

Access to the „Configuration" menu.

Use the right knob [33] to highlight the icon "Select
Jobs for Job Mode".

Press right knob [33] to confirm.

Use right knob [33] to highlight the job number.

Press right knob [33] to confirm – the icon of chosen
parameter will appear on the lower part of the display.

Press button [34] to return to main menu.
24
Select Jobs for Job Work - it
allows to choose which jobs will be
enable when Job Mode will be
activated.
Figure 54
Figure 55
English