Lincoln Electric LF 52D Operator's Manual page 27

Enable/ Disable Jobs Mode or
Select Jobs for Jobs Mode – user
has access to operate only with
selected jobs.
WARNING: First of all user have to select jobs which can
be used in Job Mode (Lock -> Enable/ Disable Jobs Mode
or Select Jobs for Jobs Mode).
To activate Job Mode:

Access to „Configuration" menu.

Use right knob [33] to highlight the Job Mode icon.
Figure 56

Press right knob [33]. The Job Mode menu is shown
on the display.

Use right knob [33] to highlight one of the option
shown on the figure below.
Cancel Job Mode
Activate Job Mode
Figure 57

Press right knob [33] to confirm the selection.
WARNING
After activated Job Mode the icon of this function will be
displayed on the Welding Parameters Bar. Load Memory
and Save Memory options will be blocked in this mode.
English
Set the Language – user can choose
interface language (English, Polish, Finnish,
French, German, Spanish, Italian, Dutch,
Romanian).
To set the language:

Access to the "Configuration" menu.

Use right knob [33] to highlight the "Set the Language"
icon.

Press the right knob [33]. The Language Menu is
shown on the display.

Use right knob [33] to choose the Language.

Press the right knob [33] to confirm selection.
25
Figure 58
Figure 59
English