Lincoln Electric LF 52D Operator's Manual page 15

Advanced User Interface (U7)
31
32
Figure 7
31. Display: 7" TFT display shows welding processes
parameters.
Table 6 Standard / Advance UI Look
English
34
Figure 8
Figure 9
32. Left Knob: Sets the value in the top left corner of the
display. Cancel selection. Return to the previous
menu.
33. Right Knob: Sets the value in the top right corner of
the display. Cancel selection. Confirmation of
changes.
34. Button: It enables return to main menu.
User have access to the two different views of
interface:

Standard view (Figure 8.)

Advanced view (Figure 9.)
33
To choose the view of interface:

Press the button [34] or right knob [33].

Use the right Knob [33] to highlight the "Configuration"
icon.

Press the right knob [33] to confirm decision.

Use the right knob [33] to highlight "UI look" icon.

Press the right knob [33] to confirm decision.

Select one of the view (Standard – Figure 8. or
Advanced – Figure 9.).

Press the button [34] or left knob [32] to return to main
menu.
13
Functions
34. Status bar.
35. Measured value of current
(Figure 8) and
Figure 9).
36. Measured value of voltage.
37. Parameter Value (wire feed
speed or current) regulated
by left knob [32].
38. Parameter Value (voltage,
trim) regulated by right knob
[33].
39. Visualization of Welding
Parameters.
40. Welding Parameters Bar.
voltage
English