4.6
Setup WISE-221x Network
After configuring all end devices into the same network with WISE-4210-AP, users
can go to End Devices tab to check End Device List.
MAC Address: The unique identifier of each end devices.
Modbus ID: Modbus ID is automatically assigned by WISE-4210-AP. User can
configure Modbus ID manually in Configuration \ Modbus \ Modbus ID.
RSSI (dBm): Signal strength when data updated from end device to AP. RSSI-
will be updated after WISE-4210-AP received data from WISE-221x end node
devices. An RSSI level higher than -100dBm is recommended.
Inactive Time: Elapsed time since last time WISE-4210-AP receives data from
an end node devices. If an end node device update data every 5 second and it
has good wireless signal quality, Inactive Time will show 0 or 1 every 5 seconds.
4.7
WISE-221x IO configuration
4.7.1
Date Update
Please go to End Devices \ Date Update to configure the data sample and update
interval, then the user can input the update interval.
27
WISE-221X User Manual