4.1.3
Binding Process Between WISE-2410X and WISE-6610
This section will guide you to setup the connection between WISE-2410X and
WISE- 6610.
Enter the "Network Server (http)" in WISE-6610 gateway as follow.
1.
2.
Create an end node device according the OTAA or ABP method. The following
flow will use ABP mode for description the binding process.
Note: If select "Commissioned", which means the node will use OTAA mode for
connecting with a gateway.
Note: If select "Active Nodes", which means the node will use ABP mode for
connecting with a gateway.
23
WISE-2410X User Manual