Connection - Advantech WISE-221 Series User Manual

4.1

Connection

1. Connect WISE-221X to your computer via a micro-B USB port. The USB driver
is required for creating a virtual COM port with your computer. Please refer to
the following link to get the latest USB driver: CP210x USB to UART Bridge
VCP Drivers:
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-
drivers
2. Connect WISE-4210-AP to your computer via the RJ-45 LAN port, and config-
ure the IP address of your computer as the default IP address of mod-
ule:10.0.0.1
Figure 4.1 Connection WISE-221X and WISE-4210-AP
Note! Micro-B USB cable for configuring WISE-4210 nodes is available for
ordered:

WISE-221X User Manual
1700023619-01 1M micro USB type-B male to USB type-A male
cable
20