Baileigh Industrial BS-712MS Operator's Manual page 22

9. Remove the shipping strap that holds the saw bow
down. Save the strap and use whenever
transporting the saw.
10. Attach the handle to the saw with the hex bolts, flat
washers, lock washers, and hex nuts provided. For
the correct orientation. Use the access door on the
rear of the machine when attaching the nuts.
Attaching the Support Bar
The support bar helps to prevent the saw from tipping
over when the bow is in the vertical sawing position.
Attach the bar to the back of the saw, just left of the
coolant access doorknob. Use the (2) hex bolts and
lock washers provided.
CAUTION:
Support Bar must be installed prior to using
the saw in the vertical position.
AVOID TIP OVER! The
19
19