Storage And Transportation; Safety Requirements; Warranty Liabilities - PROMIX -SM104 Series Operating Manual

10. STORAGE AND TRANSPORTATION

Prior to putting into operation, the locks must be stored in the manufacturer's packing, in
rooms with an ambient temperature
at 25º С in compliance with storage conditions as per GOST 15150-69.
Locks transportation conditions must comply with group C as per GOST 23216-78 in terms of
exposure to mechanical factors, and Ж2 as per GOST 15150-69 in terms of exposure to climatic
factors.

11. SAFETY REQUIREMENTS

The design of the locks ensures safety of personnel involved in mounting and maintenance.
Due to low DC supply voltage, the products correspond to class III as per ГОСТ 12.2.007.0-
75 and are electrically safe.
Fire safety of the locks is ensured by use of non-combustible or hardly combustible materials,
and low supply voltage.
12. DISPOSAL
The product is not hazardous for human life and health or for the environment; disposal after
its service life is performed without taking any special measures for environment protection.

13. WARRANTY LIABILITIES

The manufacturer, ETC PROMIX LLC, warrants conformity of Promix-SM104 locks to
requirements of current Technical Specifications provided that transportation, storage, installation
and operation rules established in this Manual are followed.
The warranted operation period is 12 months from the date of sale but not
longer than 18 months from the day of acceptance by the manufacturer's QCD.
Within the period of warranty, ETC PROMIX LLC undertakes to repair defective products free
of charge. Expenses for transporting the product to the place of repair and back will be borne by
the Buyer.
Warranty liabilities do not cover any defects and damages caused by:

Improper maintenance by the Buyer;

Use of the product under conditions that do not comply with the operation requirements;

Mechanical damages or disassembly of the products by the Buyer;

Non-observance of the transportation and storage rules.
Faulty products are accepted for repair only together with the latch, on the
obligatory condition that factory labels are retained on the product body.
On expiration of the warranty service period, the manufacturer provides after-warranty service
on a contractual basis.
To improve product quality the manufacturing plant reserves the right to make
modifications to the product design without prior notice.
of -30 to +50 °С
and a relative humidity not higher than 98%
Promix-SM104
9