10-1.16.Emergency Disconnect Installation.
1.
Position emergency disconnect (17,
on bracket (6) and secure with two screws (23),
lock washers (26) and flat washers (27).
2.
Install the knob on the emergency disconnect (17)
EZ30-20
10-4
3.
Reconnect harness (1,
disconnect (17,
Figure
10-1)
4.
Install upper compartment covers as described in
paragraph
5.
Turn on the key switch (20) and emergency dis-
connect (17).
Figure 10-2 Wiring Harness
Figure
10-2) to emergency
Figure
10-1).
5-2.
BL-EZ30-0815 - 07-28-2019