Forks; Lift Carriage; 5-5.1 Removal; 5-5.2 Installation - Big Joe M22 Installation, Operation, Maintenance & Repair Parts

5-5. FORKS.

Check the forks periodically for cracks and other dam-
age.
5-5.1. Removal
CAUTION: The forks are very heavy and we do not
recommend doing this by yourself.
1. Pull up the fork pin and slide the fork to the open
slot in the bottom and center of the fork carriage.
2. Once in the center in front of the slot tilt the fork
up and while supporting the fork, lift the fork off
the carriage.
3. Repeat step 1 and 2 with the second fork.
5-5.2. Installation
CAUTION: The forks are very heavy and we do not
recommend doing this by yourself.
R8358
BL-M22EP-0119 - 01-11-2019
1. Lift the fork and position the fork at the open slot
in the bottom and center of the fork carriage.
2. Pull up the fork pin and slide the fork to the
desired position and then let go of the fork pin.
3. Repeat step 1 and 2 with the second fork.

5-6. LIFT CARRIAGE.

1. Completely lower the carriage until the chains are
slack, then disconnect battery.
2. Remove the lift chains as described in paragraph
5-4.
3. Using a suitable lifting device attached to the lift
carriage, slowly raise the carriage out of the mast.
4. Remove snap ring and then remove the roller.
5. Repeat step 4 for all rollers on the carriage.
6. Install the lift carriage in the reverse order of
removal.
Figure 5-2 lift Carriage
5-3