10-1.17.Lift Limit Switch; (Used Up To Serial # E2120047).10-6 - Big Joe EZ30 Operation, Maintenance, Repair Parts List

10-1.17.Lift Limit Switch

(Used up to Serial # E2120047).
10-1.17.1.Lift Limit Switch Removal.
1. Lower forks fully.
2. Turn off the key switch (20,
emergency disconnect (17).
3. Remove the upper compartment covers as
described in paragraph
4. Tag and disconnect harness (3,
limit switch (10, Figure
EZ30-9
10-6
Figure 10-1) and
5-2.
Figure 10-2) from
10-4).
Figure 10-4 Compartment
5. Remove two screws (1) and limit switch (10) from
bracket (2).
10-1.17.2.Lift Limit Switch Installation.
1. Position limit switch (10,
(2) and secure with two screws (1).
2. Reconnect harness (3,
(10, Figure 10-4).
3. Install upper compartment covers as described in
paragraph 5-2.
4. Turn on the key switch (20,
emergency disconnect (17).
Figure 10-4) on bracket
Figure 10-2) to limit switch
Figure 10-1) and
BL-EZ30-0815 - 07-28-2019