Page 1
We supply a free safety wall anchor with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied. mocka.co.nz | mocka.com.au...
Page 2
Two Door Storage Locker Assembly Instructions CLICK! CLICK! Slide the legs [3] into the bottom of panels [1] and [2] until they click into place. mocka.co.nz | mocka.com.au...
Page 3
Two Door Storage Locker Assembly Instructions CLICK! CLICK! Slide the legs [4] into the bottom of panels [1] and [2] until they click into Attach panel [5] to panels [1] and [3] as shown. place. mocka.co.nz | mocka.com.au...
Page 4
Two Door Storage Locker Assembly Instructions Attach panel [6] between panels [2] and [5] as shown. Secure the bottom panel [7] by clicking into place as shown. mocka.co.nz | mocka.com.au...
Page 5
Two Door Storage Locker Jolt Wardrobe Assembly Instructions ASSEMBLY INSTRUCTIONS Attach the top panel [8] as shown. Secure the top panel [8] by clicking into place as shown. mocka.co.nz | mocka.com.au mocka.co.nz | mocka.com.au...
Page 6
Two Door Storage Locker Assembly Instructions Insert 4x clips (A) into the back and front clip brackets at your desired Place panel [9] into the unit over the clips to form the shelf. shelf height as shown. mocka.co.nz | mocka.com.au...
Page 7
Attach handle (E) to door panel [10] with 2x bolts (D) and tighten with a Attach the bottom of the door by inserting 1x washer (B) and 1x rod (C) screwdriver. through the door panel [10] as shown. Twist the rod into place and secure by bending the clasp down. mocka.co.nz | mocka.com.au...
Page 8
To attach the top of the door, insert 1x rod (C) through the door panel Repeat Steps 11 to 13 to attach the other door [11]. as shown. Twist the rod into place and secure by bending the clasp up onto it. mocka.co.nz | mocka.com.au...
Page 9
Screw the other end into the wall at the marked height with a wall screw wall with a pencil. Attach one end of the wall mount strap (F) to the (not supplied). You’re done, enjoy! back of the unit with a 1x screw (F). mocka.co.nz | mocka.com.au...
Need help?
Do you have a question about the Locka and is the answer not in the manual?
Questions and answers