Mocka Ladder Shelf Assembly Instructions Manual

Mocka Ladder Shelf Assembly Instructions Manual

Advertisement

Ladder Shelf
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
C
B
nut
x24
dowel
bolt
x8
x24

Hardware Supplied

Phillips & Flathead screwdrivers required
WARNING:
Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child attempts to
climb up on the furniture or in the event of an earthquake. Accordingly,
we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend these
are used to prevent your product tipping. The fixing device provided
should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
mocka.co.nz | mocka.com.au
D
E
screw
covers x24
screw
x4
anchor
W
Wall
Safety
Screw
Strap
X
Y
wall
r/washer
screw
x1
x1
Z
washer
x1
Wall Strap
WARNING – This is not a ladder. Please do not climb or
step on this product.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ladder Shelf and is the answer not in the manual?

Questions and answers

Summary of Contents for Mocka Ladder Shelf

  • Page 1 Ladder Shelf Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Wall Safety screw Screw dowel Strap bolt covers x24 screw Hardware Supplied wall r/washer anchor screw Phillips & Flathead screwdrivers required washer WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e.
  • Page 2 Ladder Shelf Assembly Instructions To begin, insert 2x dowels (C) and 2x nuts (B) into each ladder rung. Ensure all bolt connections are tightened with a screwdriver. Then attach each rung to the ladder rear sides using bolts (A). mocka.co.nz | mocka.com.au...
  • Page 3 Attach the two side braces to the ladder using 4x screws (D). Tighten Rotate ladder shelf around. Fit the top panel into position between the all screws with a screwdriver. two braces. Insert 4x nuts (B) into panel and fasten using 4x bolts (A).
  • Page 4 Ladder Shelf Assembly Instructions Fit the second panel into position between the two braces. Insert 4x Fit the third panel info position between the two braces. Insert 4x nuts (B) nuts (B) into panel and fasten using 4x bolts (A). Tighten with a into panel and fasten using 4x bolts (A).
  • Page 5 Ladder Shelf Jolt Wardrobe Assembly Instructions ASSEMBLY INSTRUCTIONS Fit the bottom panel into position between the two braces. Insert 4x Ensure all screws and bolts are securely tightened before and during nuts (B) into panel and fasten using 4x bolts (A). Tighten with a use.
  • Page 6 Ladder Shelf Assembly Instructions Wall Strap Strap Washer wall anchor wall screw Once assembled lift furniture into place, do not drag. Attach safety Move the ladder into the desired location up against a wall. Use a drill to strap (W) to the top of the back side of the ladder using screw (Y).

Table of Contents