Mocka Locka Console Table Assembly Instructions Manual

Locka Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A B
clip
pin
x4
x4
F G
wall mount door hinge
kit x1 x2
Hardware Supplied
Phillips screwdriver required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
C D
E
plug bolt handle
x4 x4 x2
H I
door lock small screw
x2 x4
1