Husky 33056 Assembly, Installation, Operation And Maintenance Instructions page 3

1. Place adapters into the 5
and T-bolts must be rotated into the Un-locked position as shown.
A
B
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information /
Tech Support / Product Updates. ©2017 DTS Manufacturing. All Rights Reserved. August 2, 2017‐Rev3 Page‐3
th
Wheel "Pucks" that were installed in your truck bed from the factory. The handles
T-Bolt handles are shown in
the Un-Locked Position
T-Bolt handles are shown in
the Locked Position
Front of vehicle
B
th
GM 5 wheel "Puck"
B
A
GM Truck bed NOT shown for
clarification purposes
Driver's side installation shown
A
2. NOTICE: There are 2 different
adapters, "A" and "B". One each
is used on the drivers side and
one each on the passenger's
side. When installed properly and
locked, the lock handles will face
each other.
3. Once the Adaptors are
installed; install safety lock pin
thru the T-Bolt if not already
installed, then turn handles
into the locked position. This
may require adjusting the 1"
bolts on the T-bolts for a
looser or tighter fit.