Setting The Cleaning Controls - Numatic TTV-5565/200T Operator's Instruction Manual

Setting the cleaning controls

233887 / 06/11 (A05)
Insert the key into the master control on/off and quarter-turn it clockwise to the 'ON' position.
The battery charge-level indicator will illuminate for 5 seconds.
Set Water Flow Rate as required, depending on floor type and level of soiling
1L 2L 3L 4L
Set automatic Chemical Dosing Mix as required, depending on floor type and level of soiling.
100:1 75:1 50:1 25:1
Set desired traction Speed as required, depending on floor type and level of soiling.
Middle speed is the optimum cleaning speed.
The TTV-5565 has been fitted with a whisper mode, this reduces the
noise produced by the vacuum motor by 3dB.
To operate the Whisper mode start the machine in the normal way.
When the machine is running normally the off aisle light will show a
constant green. This means the Vacuum motor is running at 100%.
With the machine running press the off aisle button once the Vacuum
motor will reduce speed to 75% of capacity and the off aisle light will
FLASH green.
1 L / Min
2 L / Min
3 L / Min
4 L / Min
100 : 1
75 : 1
50 : 1
25 : 1
14