ATEN VM3200 User Manual page 159

The following table shows the available command list:
Input
Command Input
Port
sw i xx
*
sw
sw
Note: 1. Each command string can be separated with a space.
2. The Address command is for RS-422/485 only. If the address
parameter is missing from RS-422/485 commands, the default a00
will be used. Skip the address for RS-232 commands.
3. The Port Number and Address command strings can be skipped,
and the default value will be used.
Output
Output Address
Port
o yy a
*
o yy a
*
o yy a
*
Chapter 6. CLI Commands
Device
Stream Control
No.
zz video
* audio
all
zz video on
* audio off
all
zz video +
* audio -
all
Enter Description
[Enter] Switch Input Port xx to
Output Port yy on Address zz
xx:01~32 *
yy:01~32, *
zz: 01~16, *
[Enter] Turn on Output Port yy
Turn off Output Port yy
on Address zz
yy:01~32, *
zz: 01~16, *
[Enter] Switch Next Input to Output
Port yy
Switch Previous Input to
Output Port yy
yy:01~32 *
143