Getting Started - Mackie SRM210 V-Class Owner's Manual

Introduction
SRM | V-Class High-Performance Powered Loudspeakers
are a whole new tier of SRM portable loudspeakers
that aren't just made to get the job done, but to get
it done better than anything else with unmatched clarity,
output, and control packaged into sleek, rugged enclosures.
Robust 2000W amplifiers with our Advanced Impulse™
DSP tuning and Intelligent Bass Management™ deliver
a consistent listening experience to your whole audience
even at extreme volumes.
A built-in digital mixer with full-color display features
Bluetooth® streaming and powerful processing plus
complete wireless control via the SRM Connect™ app.
Experience the new definition of high-performance for DJs,
clubs, HoW, rental, and beyond with SRM | V-Class.
How to Use This Manual:
After this introduction, a getting started guide will help
you get things set up fast. The hookup diagrams show
some typical SRM | V-Class loudspeaker setups, including
some that involve a subwoofer.
This icon marks information that is critically
important or unique! For your own good, read and
remember them...it is a good idea to pay special
attention to these areas in the Owner's Manual
marked with the "VERY IMPORTANT" hand icon.
There's an illustration of a microscope,
so, of course, you're going to get more
detailed information when you see this
little guy. There are explanations of
features and practical tips listed here.
It's a good idea to pay attention to text displayed
next to a note icon, as this icon draws attention
to certain features and functions relating to
the usage of the SRM | V-Class Series.
Please write the serial numbers here for future reference
(i.e., insurance claims, tech support, return authorization,
make dad proud, etc.)
Purchased at:
Date of purchase:
4
SRM | V-Class High-Performance Powered Loudspeaker Series

Getting Started

The following steps will help you set up the loudspeakers
quickly.
1. Make all initial connections with the power switches OFF
on all equipment. Make sure the master volume, level and gain
controls are all the way down.
2. If not using a subwoofer, connect the outputs from
the mixing console (or other signal source) to the inputs
on the rear panel of the loudspeakers.
3. If using a subwoofer, connect the outputs from
the mixing console (or other signal source) to the inputs
on the subwoofer, then connect the high pass outputs
from the subwoofer to the inputs of the loudspeakers.
4. Push the line cord securely into the subwoofer's /
loudspeaker's IEC connectors and plug the other ends into
grounded AC outlets. The subwoofer/loudspeaker may accept
the appropriate voltage as indicated near the IEC connector.
5. Turn the mixer (or other signal source) on.
6. Turn the subwoofer on (if applicable).
7. Turn the loudspeakers on.
8. Make sure the loudspeaker's channel gain knob(s)
are set to mic / Hi-Z or line followed by setting the channel
levels to (or near) 0 dB. More information may be found
on pages 11-13.
9. Start the signal source and raise the mixer's main L/R
fader up to a comfortably loud listening level.
Things to Remember:
• Never listen to loud music for prolonged periods. Please see
the Safety Instructions on page 2 for information on hearing
protection.
• As a general guide, the mixer (or other signal source) should
be turned on first, subwoofers next, and SRM | V-Class
loudspeakers last. As such, the SRM | V-Class loudspeakers
should also be turned off first, followed by the subwoofers,
then the mixer. This will reduce the possibility of any turn-
on or turn-off thumps and other noises generated by any
upstream equipment from coming out of the speakers.
• Save the shipping boxes and packing materials! You may
need them someday. Besides, the cats will love playing
in them and jumping out at you unexpectedly. Remember
to pretend like you are surprised!
• Save your sales receipt in a safe place.