Mackie SRM210 V-Class Owner's Manual page 3

Features
Industry-leading 2000W Class-D amplifiers
• Our most advanced amplifier platform ever, delivering
incredible stability, headroom, and audio fidelity
• Unrivaled reliability and rock-solid operation
can withstand the most demanding applications
• Universal power supply (100-240VAC) with Power
Factor Correction for stable operation even with
unstable AC power
Advanced Impulse™ DSP – Proprietary Acoustic Tuning
• Crystal clear sound across the entire dispersion zone
means the whole room is the sweet spot
• Precision crossover and transducer time-alignment
ensures balanced and accurate sound
Intelligent Bass Management™
• Our proprietary LF management technology maintains
tonal balance and output level when operating at very
high volumes while keeping the bass tight and punchy
Custom Sym-X™ Horn
• Allows for total efficiency from the HF transducer
minimizing distortion and increasing output
• Creates a perfectly symmetrical, flat response at
the crossover point for exceptionally smooth midrange
• The horn-loading frequency is set below the drivers'
LF capability allowing for maximum efficiency
and optimal performance at the crossover point
High-Performance Custom Transducers
• Large, powerful magnets partner with robust motors,
voice coils and spiders to provide the highest possible
efficiency and transient accuracy
• Additional cooling vents surrounding the specially
designed voice coil plus directional cabinet porting
ensures maximum heat dispersion and reliability
• Premium polymer high-frequency driver provides
the flattest possible response for incredibly smooth
highs that sound natural and balanced
Transparent System Limiting and Protection
• Dedicated processing module monitors and protects
the amplifier in real time
• Sound quality and tonal balance is maintained
even under heavy limiting
• Utilizing powerful multi-band compression, the amplifier
can target specific frequency ranges to prevent
the system from being overloaded rather than turn
everything down at the expense of overall output
• Input limiting keeps your source signal in check
so if you're sending audio that's a bit too hot,
the speaker will cool it down
Like us
Part No. SW1296 Rev. A 05/20
©2020 LOUD Audio, LLC. All Rights Reserved.
Follow us
SRM Mix Control™ Built-in 4-Channel Digital Mixer with Bluetooth®
• Dual independent channels that support mic, line,
and instrument signals
• Dedicated 1/8" stereo aux channel
• Stream music from any Bluetooth® enabled device
• High-contrast full color display for easy single-knob
access to mixer and processing
• Adjust channel levels and EQ
• Application and venue specific voicing modes
• Alignment delay – up to 100 feet
• Save and recall up to 10 user presets
• Screensaver plus dimmer and contrast control
• System lock with 4-digit passcode
• Change front LED function: Green, white, off,
signal present, multi (cycle through colors)
Complete Wireless Control via the SRM Connect™ App
• The SRM Connect™ app gives you access
to all adjustments and settings including EQ,
levels, and presets
Wirelessly link two SRM | V-Class speakers together for music
streaming applications plus complete control over both speakers
• The latest Bluetooth technology allows up to 100 meters
of range between linked speakers
• Stereo or dual zone linking modes allows discrete
control over the inputs and outputs of the entire
system across two rooms or zones
• Creates an incredibly clean setup in minutes
Versatile configuration options
• Dual-angled cabinet design allows for use
as a high-performance floor monitor
• Dual angle pole-mount provides optimal coverage
and minimal reflections in most venues. The 7-degree
downward tilt is perfect for when the speakers are on
elevated stages.
• M10 flypoints for professional installation
Watch our dang videos
3
Owner's Manual