Mackie SRM210 V-Class Owner's Manual page 16

In order to change the delay, first push the speaker
control knob when the delay icon is illuminated (see
image above). This opens the delay view.
From here, rotate the speaker control knob clockwise
until the ms parameter is highlighted.
This is the only parameter that can
be changed here; the ft and m delay time
ranges update automatically dependent
on where ms is set.
Push the speaker control knob in to select
the ms parameter followed by rotating the speaker
control knob clockwise (raise the delay time )
and counter-clockwise (lower the delay time).
10.1
3.0
10.1
3.0
Like the previous sub-menus, the delay also
has a left-facing arrow. Illuminating and selecting
this simply returns you to the menu.
16
SRM | V-Class High-Performance Powered Loudspeaker Series
DELAY
9
ms
ft
m
DELAY
9
ms
ft
m
Bluetooth
This is where to set up and view wireless connectivity
options for the devices and speakers.
MAIN MODE
BT
DELAY
Below is a list of the parameters that may be edited:
Device – The device may either be paired or not
paired.
To pair:
(1) Make sure "PAIR" is illuminated and push
the speaker control knob.
NOT PAIRED
PAIR
NOT LINKED
CONNECT
BT MODE: STEREO
CHANNEL: LEFT
(2) The text "NOT PAIRED" will change
to "DISCOVERABLE" and "PAIR" will change
to "CANCEL". From here, you can either
(A) turn the device and device's bluetooth
on to pair, or (B) push the speaker control
knob to cancel the action.
DISCOVERABLE
CANCEL
NOT LINKED
CONNECT
BT MODE: STEREO
CHANNEL: LEFT
(3) The text "DISCOVERABLE" will change
to "PAIRED" and "CANCEL" will change
to "DISCONNECT". From here, you can either
(A) use the device and SRM Connect app
to control the loudspeakers, or (B) push
the speaker control knob to disconnect.
PAIRED
DISCONNECT
NOT LINKED
CONNECT
BT MODE: STEREO
CHANNEL: LEFT
SUB
CONFIG